FDF Nissan 350Z/G35 フロントメガアングルキット

260,700円(税23,700円)

購入数

FDF Raceshopのフロントナックルキットです。

角度- ステアリングのオフセットとタイヤのセットアップの調整により最大70度

アッカーマン- 調整可能

ロールセンター- 40mm補正

バンプステア- タイロットのピッチ角によりドリフト時のバンプを最小限に抑えます

キャスター- トレイルを増してキャスターを減らす事により、タイヤの接地面を増やしてグリップ力を上げます。結果、バンプステアーを減らし、ロックto ロック時の車の浮き沈みを減らす事が出来る為、振り返し時のスピードアップ、アクセルオン時の楽な振り返しを可能にしています

キャンバー- -3度から-6度まで調整可能

トレット幅- 片側50-75mm

サスペンション- フロントサスペンションの性能がフルカウンター時でも最大限に活かせるので、グリップ力を確保できます。

ジョイント- クロモリ製ヘイムジョイントとボールジョイントを使っており、簡単に交換可能。

軽量化- コンパクトなナックルデザインで軽くて丈夫なデザインです。フレームは衝撃を受けても取り付け位置が破損するのを防ぐ設計です。パウダーコート処理済、40%の軽量化を実現しています。

キットには以下が含まれます

ロアアームx2
テンションアームx2
アッパーアームx2
ナックルx2
アッカーマンプレート
タイロットx2

受注販売となりますので、発送までに1~2か月の製造期間がかかります。

こちらの商品は送料が2500円です。


-Angle, 70 degrees depending on your steering rack/offset rack setup

-Ackerman, adjustable ackerman

-Roll Center, optimized handling by adding 40mm of roll center correction

-Bump steer, minimal bump steer in drift by perfecting tierod pitch angle

-Caster, added trail and reduced caster which adds more grip by increasing tire contact patch, causes less bump steer, less jacking from lock to lock, increase transition speed, effortless transition while on throttle

-Camber, optimized camber ranging from -3 to -6

-Track Width, 50-75mm wider per side creating a stable and high clearance front end

-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip

-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable

-Weight Reduction, compact knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 2024 aluminum used where possible which provides steel like strength at 40% weight reduction.

The kit includes everything you need to install

-2 lower control arms

-2 compression arms

-2 upper control arms

-2 knuckles

-ackerman plates

- 2 inner and outer tierods

-all bearings and hardware required for install.




For custom colors, email your order number and the color wanted

Please allow 2-3weeks of fabrication before the item is sent